Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Medford Oregon Testing Methods & Equipment

water testing medford or well testing medford orThe United States Environmental Protection Agency (EPA) has developed and approved laboratory testing methods to be used in the analysis of wastewater, drinking water, sediment, and other environmental samples that are required under the authority of the Clean Water Act (CWA) and the Safe Drinking Water Act (SDWA). These methods are published as regulations at Title 40 of the Code of Federal Regulations (CFR). The EPA publication SW-846 entitled Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, is the Office of Solid Waste’s (OSW) official compendium of analytical and sampling methods that have been evaluated and approved for use in complying with the Resource Conservation and Recovery Act (RCRA) regulations.
 

Standard Methods
Various offices of the EPA publish laboratory-testing methods that outline procedure, equipment, documentation, and quality control requirements. Members of our staff at Neilson Research Corporation monitor changing regulations and adhere to the most recently approved standard methods. Wastewater, drinking water, sediment, and other environmental samples are handled and tested exactly according to the EPA’s published standard methods.

Laboratory Equipment
At NRC our scientists evaluate your sample with highly technical and carefully calibrated equipment, including the following:

Gas Chromatography (GC)
Specifically gas-liquid chromatography – involves a sample being vaporized and injected into a chromatographic column then transported through the column by a flow of inert gas. The constituents of a solution are separated by their migration rate through the column due to differing molecular weight, size, and charge. Once separated, they may be analyzed via a number of different techniques including:

• Flame Ionization Detection (GC-FID) detects ions by change in current within a flame
• Electron Capture Detection (GC-ECD) detects ions created by electron bombardment
• Mass Spectroscopy (GC-MS) detects gas phase ions by mass to charge ratio

High Performance Liquid Chromatography (HPLC)
Like GC, HPLC separates a solution into its constituent compounds. The solute can be manipulated through different solvents and phases. As a result, HPLC is highly versatile and has the ability to separate a wide variety of chemical mixtures. As with GC, once the constituents of a solution are separated, they then can be analyzed by a number of different detectors including:
• Diode Array Fluorescence detects molecules by absorbance readings at multiple wavelengths
• Ultraviolet Spectroscopy (UVS) detects molecules by change in ultraviolet field

Ion Chromatography (IC)
IC uses a conductivity detector to quantify anions (negatively charged ions) and cations (positively charged ions) by selective absorption through liquid chromatography.

Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES)
High temperature plasma flame vaporizes a sample and trace metals are detected based on the optical emission of excited atoms.

Inductively Coupled Plasma Mass Spectroscopy (ICP-MS)
High temperature plasma flame vaporizes a sample and trace metals are detected based on their mass to charge ratio.

Cold Vapor Atomic Absorption Mercury Analysis (CVAA) A Tin (II)
Chloride salt is used to create ground state mercury atoms at room temperature, which are then quantified based the absorption of light by the mercury atoms.

Segmented Flow Analysis (SFA)
Colorimetric determination (concentration based on intensity of color change) is used to quantify a number of different chemicals including nitrate, nitrate, cyanide, and ammonia that may be present in a sample.

Total Organic Carbon Analysis (TOC)
A nondispursive infrared detector (NDIR) measures the carbon content and particulate organic matter present in water samples. It is commonly used to evaluate the effectiveness of drinking water treatment processes.